Products Center
Touch-safe Heater CS 060 Series 50W-150W
- Contact Us
- Tel：+8613362703406
- Email：tk@chtkdz.com
- Url：http://www.chtkdz.com
●Low surface temperature
●Quick mounting due to clip fixing
●Doble insu lated(plastic)
●Wide ovltage range
●Small size
Touch-sateh neater for the use In enclosures With electrical / electronlcal components. The deslgn of the heater supports the natural convection whlch results In a hlah air-Current of warm alr. The surface temperatures on tne accesslble side surfaces of the housing are kept down as a result of the heater design. Our complete range of thermostats and hygrostats can directly be connected to the heater CS 060. This heater is also available in a version with plug-in tnermostat requiring no additional wiring(CSF 060). Both versions are designed for permanent operation.
| Technical Data | |
| Operating voltage | 120-240VAIG/DC*(min.110V,max.265v) |
| Heating capacity | see table |
| Heater element | PTC resistor-temperature limiting |
| Surface temperature | <80~C(176°F)，except upper protective grille |
| Connection | 4-pole terminal 2.5mm²torpue 0.8Nm max. |
| Casing |
Black plastic, UL94V-0 standard V-0 fire rating Plastic according to
UL94-V-0，black
|
| Mounting | clip for 35mm DIN rail，EN 50022 |
| Fitting position | Vertical |
| Operating/storage tmperature | -45 to+70℃(-49 to+158°F) |
| Ptotection type/Protection class | IP20/Ⅱ(double insulated) |
| Note | other voltages on request |
Operating with voltages below 140V AC/DC reduces heating performance by approx.10%
